Tag: leather

FREE Shuffle Card Holder Pattern

For my Newsletter subscribers, the Shuffle Card Holder isn’t a new pattern to you.  But in light of our current Covid-19 shelter-in-place environment, I’d like to offer the Shuffle Card Holder pattern completely FREE without having to sign-up for anything.  This is a quick and easy project for raw-edge substrates and is a great stash-buster for all of the little bits of cork, leather, suede or vinyl you may have lying around.  If you have ever wanted to learn how to sew on these substrates, now is the time!  A small project like the Shuffle will make things bite-sized and manageable too.

The Shuffle Card Holder is designed with 3 pockets.  There are two in the front — perfect for an ID and debit card.  But there is also a third pocket which is hidden and a great spot for a little stash of cash and even a key!  The front and back are made from a single folded piece of fabric with all sides left raw.

For a more polished look, you can take the extra minute to add some top-stitching at all of the pocket openings.  It adds a nice finishing to make the card holder extra special.

TIP:  Use a Walking Foot for nice even stitches, especially on vinyl or cork where a regular presser foot could stick.

I love using the Shuffle Card Holder when I’m switching between purses and especially when moving into a smaller bag.  It goes perfectly with the Emma Stadium Bag to keep my money hidden at public sporting events and I also love using it with the Kelly Waist Bag to keep things as light as possible.

Emma Stadium Bag by Love You Sew

As we spend more time walking and taking bike rides, the cardholder is perfect for just slipping into your back pocket or in a bike pouch.

Kelly Waist Bag and Clutch

This is also a great way to present a gift card – especially to those who are working essential jobs or just a way to let someone know you are thinking about them at this time.  You can even pair it up with The Tiny Sophia Bag for a complete on-the-go gift set!

||    Click HERE for the FREE Shuffle Card Holder pattern!    ||

 

Project Details:

 

Hugs and Stitches,

Cristy

 

 

This post may contain affiliate links.  Please visit my Disclosures page for info.

Introducing The Tiny Sophia Bag

2 Comments

We are in the thick of the holiday season and I thought I did some pretty good seasonal planning.  I made gifts for my nieces and nephew early since I went to visit them in November and even got my fancy holiday dress finished by my husband’s birthday a few weeks ago.  But then I shared my Tiny Sophia Bag with all of you on Instagram and my feed (DMs too!) filled up with requests for this pattern.  You caught me in a moment of weakness because I said, “Sure, why not?!  This is probably the time when you would like this pattern the most!”  So why not add another “thing” to the list…famous last words. Lol!

You can purchase the Tiny Sophia Bag here.

If you have been following my stories on IG, I shared these itty bitty purses by Jaquemus which I’ve been seeing all over the fashion reports.  Although completely useless as an actual purse (and WAY too expensive *eyeroll*) I still wanted one…but of course, in my own DIY way!  Spoiler alert – my way is MUCH more cost effective.

Over the summer, I toyed around with some paper templates to make a tiny bag for fun, but nothing really came out of it.  Then a visit back east to see my family made me really notice the wireless ear pods my brother was wearing.  Shortly after that, Lizzo came out on the red carpet with a tiny Valentino bag!  Combine these events and it made me wonder if the pods had a carrying case…aaaand if that case could also be a purse!

Namesake

As I was developing this pattern and making all of the prototypes, I knew this bag would be named after my niece, Sophia.  (All of my bag patterns are named after one of my nieces.)  Miss Sophia is a petite lil’ lady and the absolute CUTEST…just like this bag!  She is always game for a little fun and adventure, which makes her a great travel companion.  Since her dad was also part of the inspiration, it’s only fitting that this bag is named after her.

View B

Features

I know there are a ton of aftermarket pod cases out there and I thought a leather one would be chic and beautiful.  After a few hours (with my husband and boys at basketball practice,) I was able to draft a headphone case AND a bag by switching up the options.  This is no-sew pattern with two different views and the features can certainly be mixed and matched!

  • View A  “Mini Purse” – This has a strap on the top flap with a D-ring on the back and a snap closure.
  • View B “Accessory Case” – This has a bottom slot opening for a charger and the D-ring is set on the side.  A button stud is used as the closure.

View A

Hardware

The Tiny Sophia Bag requires rivet and snap or button stud installation.  This is assumed in the pattern (and I promise I will add more posts about how I install.)  I want to let you know my favorite suppliers:

  • Rivets:  For a long time, I set these just using just a hammer and anvil.  You can find these tools  in my shop, here.  Emmaline Bags carries a wide variety of sixes in different finishes. (Pictured above are the “small” rivets in Antique brass.)
  • Snaps: I’m a big fan of double-cap spring snaps from Gold Star Tool.  These are the same ones I used for my Kelly Anorak which you can find here. (On the cover photo, I have a size 20 ligne brass snap.)
  • Button Studs (screw on): These are THE best, since there are no special setting tools needed…just a screwdriver.  I grab most of mine from Amazon and I like the Tandy ones (when I’m in a pinch for timing since there is a store nearby.)  I think the 6mm/7mm head ones are a good proportion for this small bag.  (The 8mm head studs are used in my Kelly Waist Bag pattern)

New SVG Files

A big addition to this pattern release is the inclusion of SVG (scalable vector graphic) files which you can use with most electronic cutting machines.  I’ve always imported images and traced my own files, but have never created ones from Illustrator before.  So, I was pleasantly surprised to see how this pattern cut on my machine!  I have an old Silhouette Cameo with a straight knife and the cork cut so well on setting #7.  It did not like leather though…I’m hoping the rotary blades do much better.  There are three files for the different views and an extra one to combine all of the features together.  Please let me know what you think about this new feature!

Cutting by Hand

For those who don’t have a cutting machine, please know that I made all of these Tiny Sophia Bags by hand.  After making lots of leather bags and over a dozen of these minis, here are a few tips and tricks that will help you though.

  • I LOVE this heavy duty multi-blade craft knife set by Fiskars.  The different blades are great depending on the type of cut you need to make…my fave is the 1/2″ straight edge one.
  • The pattern essentially looks like a cross, so the edges are right angles.  If you match up the sides with a ruler, you’ll have a smoother (and more accurate) cut.
  • Use a metal ruler with a craft knife for the straight edges.
  • For thicker leather/suede, you might want to use a box cutter for a stronger blade and press down on the ruler so it doesn’t drag.
  • Speaking of blades, remember to use a new one that’s nice and sharp for clean cuts.
  • With the curves, try to find household objects like bowls that match to balance your knife against.
  • For the back D-Ring opening, one of my testers said a button-hole cutter like this one is great for cutting the edges.

Customize

There are so many different ways to customize your Tiny Sophia Bag.  Luckily, I have a nice stash of leather scraps from thrifting and from friends.  You can use leather, suede, faux leather, and even cork!  Based on the thickness of your substrate, you may have to adjust the position of the holes which is also covered in the the pattern 😉

Check out #TheTinySophiaBag on social media to see all of the different versions.  I like the extra stitching around the edges to make the bag look more polished (don’t forget to use that leather needle and teflon or walking foot!)  Many of my testers used decorative hardware too.  I can’t wait to see what you do!

If you are ready for the cutest little purse, you can grab the Tiny Sophia Bag pattern, here.  Use it to carry your trinkets, coins, and all the smartphone accessories.  One of my testers mad bags for her daughters’ dolls!  I’m adding one of these on my Christmas tree and will use it later to hang off my purse for my own headphones.

How would you use your Tiny Sophia Bag?

 

 

Happy Sewing!

Cristy

 

This post may contain affiliate links.  You can read about my Disclosure, here.

Abbey Hacks by Love You Sew

Abbey Convertible Backpack Hacks with Welt Zipper Cover + Button Stud Closure

2 Comments

Abbey Hacks by Love You Sew title

Hacking patterns is just so much fun when you can add more personal details to a project. Today, I’m sharing what I did for the backpack I made for real-life Abbey (the bag’s namesake.)  This post includes a cover for the front zipper, button stud and leather accents, and where I’ve added rivets. The Abbey Convertible Backpack is the latest pattern I’ve published and you can read up more about here, as well as check out all of the incredible tester photos for inspiration.

My Abbey is one of my nieces with a such a kind heart and adventurous spirit.  She is incredibly intelligent and is now a physical therapist in Michigan.  She has always been a straight shooter and that’s why I love her and hope to catch her sometime this summer.  Abbey is quite the outdoors-person and goes backpacking on her own all the time.   This southwestern-insprired woven fabric reminds me of her and all the probable sunsets (and sunrises) she’s seen on her many trips.

Front Zipper Cover

With the bold stripes on this woven fabric, I thought the exposed welt zipper on the original sewing pattern broke up the fabric design too much.  I wanted the stripes to continue all around the bag to show off its beauty and not compete with it.  So, I made a simple cover by creating a tube which runs the length of the bag and is secured right above the zipper opening.

To make the cover, follow all of the steps to complete the welt zipper pocket on the original pattern found here and then:

  1. Cut (1) 12″ x 2 1/2″ of Main Fabric and (1) 12″ x 1″ of Woven Interfacing.  Fold the Cover in half length-wise with right sides together.  Place the long edge of the woven interfacing wrong side together against the fold. Fuse the interfacing per manufacturer’s instructions.
  2. Re-fold the Cover with RST and sew 1/4″ seam along the raw long edge creating a tube. Back-stitch well
  3. Use a safety pin and attach it within the seam allowance.  With the safety pin closed, push it through the tube.
  4. Carefully direct the safety pin through to the other side of the tube pulling the tube right side out.
  5. Press the tube flat with seam at the top.
  6. Line up the Cover with the Welt Zipper opening covering the top-stitching and extend that line all the way out to the sides of the Front Exterior.  Pin the Cover into place.  Carefully top-stitch the cover to the Front Exterior with a 1/16″ seam allowance using a zipper foot and moving the zipper pull out of the way, as needed.  Trim the sides of the cover to match the sides of the Front Exterior.  Sew the rest of the Abbey as instructed.

Rivet Accents

I LOVE adding rivets to my bags.  They give such a professional and polished look which really elevates any handmade accessory.  The best part is they are also functional — allowing me to secure parts (especially thick substrates) of the Abbey together which would otherwise have to be sewn.

Rivets were used in making the strap and also at many of the connection points with all the hardware connectors. You can see how I used two different sized caps to vary the look.  I use a hardware press to install most of my rivets, but when I need to get close up to the rings like here on the Handle Base, I’ll use manual setting tools like this set from Tandy Leather (aff link.)

Leather Closure Tab with Button Stud

As part of the cutting instructions of the Abbey Convertible Backpack, I also added in finished dimensions if you would like to use leather, vinyl, cork or suede accents, like I did with this bag.  I used leather with the Handle, Handle Base, lower D-Ring Connectors, Bottom and Closure Tab.  However, I did change up the Closure Tab with the addition of a Button Stud.

I used a 8mm brass screw-in Button Stud (aff link) in lieu of the magnetic snap to keep the bag closed.  It was attached it to the Exterior front by punching a hole for the screw (using the same placement as the magnetic snap) and adding a touch of glue inside the stud to hold.  It’s really that easy and a big reason why I love  to use them, just like with my free Kelly Waist Bag Pattern.

For the Closure Tab:

  • Cut (2) 1/2″ x 4 1/4″ pieces of leather and glued them wrong sides together. Cut an angle on one end 3/8″ down for just some visual interest.
  • Top-stitch 1/8″ all around the closure using a walking (or Teflon) foot and leather needle
  • For the button holes, use a 4mm hole punch to cut (2) holes –  1″ and 1 3/4″ from the longest end of the Closure Tab.  Add a 1/8″ vertical cut at the top of each opening.  This allows the Button Stud to fit through the hole, but not to fall out on it’s own with movement and wear.  TIP:  I would recommend adding the holes after the bag is fully assembled so you can check placement.

These are all simple hacks to really change up the look of the Abbey Convertible Backpack and to make it personal.  The leather accents help to add more sophistication to the look as well.  Who can tell this bag is even handmade?!?  I hope Abbey loves her new bag and continues to enjoys her outdoor treks!

Project Summary:

 

Are you digging the hacks to my bag patterns?   Let me know if there any you would like to see in the comments below.  I will try to make them happen!

 

Happy Sewing Friends,

Cristy

 

This post may contain affiliate links for which I may receive a small commission if you would make a purchase.  Any compensation goes directly to running this website and keeping it as ad-free as I can.  Thanks for your support!

Kelly Waist Bag and Clutch

Introducing the FREE Kelly Waist Bag Pattern

9 Comments

It’s such an incredible feeling when inspiration hits at the right time and the creative juices are just flowing.  That’s what happened when I paired this beautiful leather from Measure Fabric with  my idea for a simple and sleek waist bag.  I was able to quickly design, prototype, tweak and write a full pattern within 48 hrs (muuuuch different from my usual practice of taking months to write a pattern!)

 

Whatever you call them – waist bag, fanny pack, belt bag, hip bag….wearing a bag around your torso is the hottest bag trend right now.  Although the classic 80’s throwback style is probably the most popular, I wanted to have something with cleaner lines to match my fashion tastes.   I also wanted to make sure if I’m making a bag (especially in leather,) it can last beyond the current trend.  So I designed a minimalist raw edge leather bag which can convert to a clutch, simply by removing the belt.

Leather

Initially, I thought I would make an envelope style clutch when I first saw this leather on Measure Fabric’s website.  I thought the leather might be a little too difficult to sew on my machine.  I figured I could use a bunch of rivets to origami it altogether since I already fell in love with the top-grain texture and beautiful neutral navy color.

Thanks to the miracle of videos on Instagram, the shop ladies were able to show me the leather’s softer hand.  The hide is approximately 2mm thick, but is still pliable enough to shape and can hold some weight.  You can check out their entire selection here. Get ready to drool over all the beautiful hides!

Bag Features

Named after one of my awesome nieces, this waist bag is all about having some freedom.  Whether you want hands-free options to wrangle the kids like me, or to attend the latest festival concert like Kelly (oh to be in my twenties again,) this is your bag!  It’s small but mighty with plenty of great features:

  • Slip pocket – Perfect to stowe away cash, ID and/or a Shuffle Cardholder
  • Simple screw on button stud – There is no need for fancy hardware or tools.  But feel free to make this your own!  You can find them on Amazon here or here and on Etsy here. (aff links)
  • Adjustable belt design – Whether you wear this with just a tee or over a bulky sweater, the belt can change with you.
  • Convertible to clutch – Simply remove the belt and you have a perfect leather clutch for a night out or use it as a pouch in a larger tote.
  • Able to use any belt – The belt guide is generously sized to accommodate most belt widths.  You can use your own belts to mix and match, creating different looks.
  • Fits many arena and public venue bag guidelines – With finished dimensions of 8″ x 5″ x 1″, the Kelly conforms to many stadium and concert bag regulations.  It’s the right size for your phone, ID, cash, with room to spare for keys.

Sewing Tips:

  • Leather and some vinyl are not self-healing.  Needle holes will be permanent, so work slowly and use clips instead of pins.
  • Use a leather needle with leather or a heavy duty (16 or 18) needle with cork or vinyl to handle the extra thickness.  Machines vary, so don’t forget to TEST before making the bag!
  • With thicker substrates, leave long thread tails to manually tie off with double and even triple knots.  Don’t try to back-stitch because your machine may not like the bulk.
  • A walking foot is great to get even stitches without sticking and a Teflon foot prevents sticking as well
  • Use a stiletto tool like this or carefully notch into the gusset 1/8″ to help maneuver around the curves. (aff link)
  • For punching the holes, I love this tool with a softer plastic bed vs a metal bed.  You get a cleaner cut through the leather. (aff link)

|| Click Here for the Kelly Waist Bag + Clutch Pattern by Love You Sew ||

#kellywaistbag #loveyousewpatterns 

Print at 100% or Actual size

Please share your projects on social media with the #kellywaistbag and #loveyousewpatterns tags.  I would LOVE to see what you do with the pattern.  Don’t forget to give me a follow and tag me @loveyousew_ so I don’t miss it!

Enjoy!!!

 

Leather for this project was provided by Measure Fabric.  All thoughts and opinions are always my own.  There are also affiliate links in the post for which I would receive a small commission only if you decide to make a purchase.

Paradigm Showcase Tour – DIY Bucket Bag

4 Comments
I am SO ridiculously happy to be kicking off the Paradigm Showcase Tour for my very dear friend, Sarah Thomas of Sariditty.  This woman does it all.  She is an incredible long-arm quilter who is known for her signature “sketchbook” style with improvisational designs.  She lectures and teaches a ton of quilting classes (with which I have actually assisted) and she is also a product designer with a line of sewing rulers and sewing tools.  (Sis is even a pilot!!!)  It’s no wonder, that “Fabric Designer” is one of her newest titles.  You can learn more about Sarah and her work in the  Paradigm Lookbook here.
Within the quilting social media world, Sarah and I have worked together through many other blog tours and only recently, were able to meet up IRL at QuiltCon to share all of our love of sewing (and an Air BnB!)  So when Sarah told me about her debut collection of fabrics, I was over-the-moon happy for this woman!  And when she asked me to be a part of her Showcase Tour, you know I was game.   It truly brings me such crazy joy to help such a thoughtful person who has really helped me navigate the industry side of sewing.
I could go on about Sarah, but will focus on her fabrics now 🙂  Paradigm fabrics are 100% cotton and digitally printed through Hoffman California Fabrics.  What really blew my mind was the incredibly innovative production style with this collection.  There are 23 different fabrics in Paradigm, but only 7 different bolts because the fabrics are either printed by the yard, half-yard, or grouped by fat-quarter as seen here.  This allows for all the fabric in less SKUs…which in my pre-sewing supply chain management job, is so clever!
But what I really love about Paradigm fabrics is that this line IS completely Sarah.  If you follow her quilt designs and pattern motifs, you see her love of geometric shapes, vivid color and there is always a butterfly close by.  So when I wanted to make a Bucket Bag (pattern to be published in the fall) for the tour, I chose this gorgeous focal print in Denim.  It has all of the swishes and spirals found in her quilting along with all the flying geese found in her piecing — all Sariditty!
For the interior, I used the half-yard bolt of Tidepool which is split with both the blue and yellow colorways of this design.  The flying geese in each print moves across different color values — from a light periwinkle to deep navy.   The changes give a lot of visual movement and why I thought it would make the perfect lining fabric.
To make sure I utilized this bolt, I used the yellow half of Tidepool as the pocket bag and interior of the slip pocket.  The triangles change from a light pink to a deep rust on this color way.  I love opening the zipper and seeing the fun pop of color to complement all of the blue.
When making bags, I love to mix in some other substrates with all of this quilt cotton.   I couldn’t help but pull out this gorgeous chestnut colored leather out of my stash to help accent and bring out the beauty of Paradigm both on the inside and outside of the bag.
And of course, there is the purse hardware.  With all the lovely pops of chartreuse, teal and violet, antique brass hardware was definitely the right choice to work with all of these fabrics.  I used rivets on the outside to work with the designs on the Denim panel and circle rings to echo all of the flying geese and swirls as well.
This bag is ready for our next quilt adventure and I hope you get to check it out in May at Quilt Market 😉
The party is just getting started so don’t forget to visit all of the other incredible makers on the Paradigm Showcase Tour through May.  Click through to the makers below or follow along on Instagram via #paradigmshowcasetour #sariditty.

Schedule:

22 April – Cristy Stuhldreher @loveyousew_ (You are here)
23 April – Rebecca Bryan @bryanhousequilts 
24 April – Hilary Jordan @byhilaryjordan
25 April – Tiffany Sepulveda @sewtiffany 
26 April – Karie Jewell @kariejewell 
27 April – Jen Timko @jentimko
28 April – Cheri Lehnow @tinkerellen
29 April – Karen Miller @redbirdquiltco
30 April – Karen O’Connor @ladykquilts
1 May – Nicholas Ball @quiltsfromtheattic
2 May – Nicole Daksiewicz @modernhandcraft
3 May – Nichole Vogelsinger @wildboho 
4 May – Kate Toney @toughkittencrafts
5 May – Sheri Cifaldi-Morrill @wholecirclestudio 
6 May – Karen Tripp @karenthediyaddict
7 May  – Isabelle Selak @southbaybella
8 May – Elise Kwon @eliseandemelie
9 May – Jessica Kapitanski @sallietomatopatterns
10 May – Suzy Williams @suzyquilts 
11 May – Sarah Thomas @sariditty

Fabric was provided for this blog post.  All thoughts and opinions are my own – I really do adore Sarah.