Category: Uncategorized

Abbey Hacks by Love You Sew

Abbey Convertible Backpack Hacks with Welt Zipper Cover + Button Stud Closure

2 Comments

Abbey Hacks by Love You Sew title

Hacking patterns is just so much fun when you can add more personal details to a project. Today, I’m sharing what I did for the backpack I made for real-life Abbey (the bag’s namesake.)  This post includes a cover for the front zipper, button stud and leather accents, and where I’ve added rivets. The Abbey Convertible Backpack is the latest pattern I’ve published and you can read up more about here, as well as check out all of the incredible tester photos for inspiration.

My Abbey is one of my nieces with a such a kind heart and adventurous spirit.  She is incredibly intelligent and is now a physical therapist in Michigan.  She has always been a straight shooter and that’s why I love her and hope to catch her sometime this summer.  Abbey is quite the outdoors-person and goes backpacking on her own all the time.   This southwestern-insprired woven fabric reminds me of her and all the probable sunsets (and sunrises) she’s seen on her many trips.

Front Zipper Cover

With the bold stripes on this woven fabric, I thought the exposed welt zipper on the original sewing pattern broke up the fabric design too much.  I wanted the stripes to continue all around the bag to show off its beauty and not compete with it.  So, I made a simple cover by creating a tube which runs the length of the bag and is secured right above the zipper opening.

To make the cover, follow all of the steps to complete the welt zipper pocket on the original pattern found here and then:

  1. Cut (1) 12″ x 2 1/2″ of Main Fabric and (1) 12″ x 1″ of Woven Interfacing.  Fold the Cover in half length-wise with right sides together.  Place the long edge of the woven interfacing wrong side together against the fold. Fuse the interfacing per manufacturer’s instructions.
  2. Re-fold the Cover with RST and sew 1/4″ seam along the raw long edge creating a tube. Back-stitch well
  3. Use a safety pin and attach it within the seam allowance.  With the safety pin closed, push it through the tube.
  4. Carefully direct the safety pin through to the other side of the tube pulling the tube right side out.
  5. Press the tube flat with seam at the top.
  6. Line up the Cover with the Welt Zipper opening covering the top-stitching and extend that line all the way out to the sides of the Front Exterior.  Pin the Cover into place.  Carefully top-stitch the cover to the Front Exterior with a 1/16″ seam allowance using a zipper foot and moving the zipper pull out of the way, as needed.  Trim the sides of the cover to match the sides of the Front Exterior.  Sew the rest of the Abbey as instructed.

Rivet Accents

I LOVE adding rivets to my bags.  They give such a professional and polished look which really elevates any handmade accessory.  The best part is they are also functional — allowing me to secure parts (especially thick substrates) of the Abbey together which would otherwise have to be sewn.

Rivets were used in making the strap and also at many of the connection points with all the hardware connectors. You can see how I used two different sized caps to vary the look.  I use a hardware press to install most of my rivets, but when I need to get close up to the rings like here on the Handle Base, I’ll use manual setting tools like this set from Tandy Leather (aff link.)

Leather Closure Tab with Button Stud

As part of the cutting instructions of the Abbey Convertible Backpack, I also added in finished dimensions if you would like to use leather, vinyl, cork or suede accents, like I did with this bag.  I used leather with the Handle, Handle Base, lower D-Ring Connectors, Bottom and Closure Tab.  However, I did change up the Closure Tab with the addition of a Button Stud.

I used a 8mm brass screw-in Button Stud (aff link) in lieu of the magnetic snap to keep the bag closed.  It was attached it to the Exterior front by punching a hole for the screw (using the same placement as the magnetic snap) and adding a touch of glue inside the stud to hold.  It’s really that easy and a big reason why I love  to use them, just like with my free Kelly Waist Bag Pattern.

For the Closure Tab:

  • Cut (2) 1/2″ x 4 1/4″ pieces of leather and glued them wrong sides together. Cut an angle on one end 3/8″ down for just some visual interest.
  • Top-stitch 1/8″ all around the closure using a walking (or Teflon) foot and leather needle
  • For the button holes, use a 4mm hole punch to cut (2) holes –  1″ and 1 3/4″ from the longest end of the Closure Tab.  Add a 1/8″ vertical cut at the top of each opening.  This allows the Button Stud to fit through the hole, but not to fall out on it’s own with movement and wear.  TIP:  I would recommend adding the holes after the bag is fully assembled so you can check placement.

These are all simple hacks to really change up the look of the Abbey Convertible Backpack and to make it personal.  The leather accents help to add more sophistication to the look as well.  Who can tell this bag is even handmade?!?  I hope Abbey loves her new bag and continues to enjoys her outdoor treks!

Project Summary:

 

Are you digging the hacks to my bag patterns?   Let me know if there any you would like to see in the comments below.  I will try to make them happen!

 

Happy Sewing Friends,

Cristy

 

This post may contain affiliate links for which I may receive a small commission if you would make a purchase.  Any compensation goes directly to running this website and keeping it as ad-free as I can.  Thanks for your support!

Holly Jumpsuit by Love You Sew

Holly Jumpsuit Review

4 Comments

Holly Jumpsuit by Love You Sew

When I sew my own clothes, I like to know they will last for awhile.  So when the jumpsuit and romper trend came out, I was very hesitant to make one.  I wasn’t sure the one-piece look would be right on me.  Oh, and there IS that issue of completely undressing when using the restroom! But alas, after a couple of years seeing so many different versions of a romper, I finally took the plunge with the By Hand London Holly Jumpsuit.

Holly Jumpsuit by Love You Sew

With many of the RTW rompers I’ve seen, they either have a very loose low v-neck wrap (probably for easier bathroom breaks) or the bottoms are way too short for my age bracket.  I fell for the Holly Jumpsuit with the nice open scoop neck (while still being modest,) the tailored waist and the 4″ inseam which is long enough for me, but could be a little too short for all of you  over 5’3″.

Holly Jumpsuit by Love You Sew

I initially bought the Holly Jumpsuit for the trouser view to help make a traditional Vietnamese Áo Dài.  I loved the wide leg, high rise, and the clean waistband which was perfect. However, it’s now been a few years and the Áo Dà has yet to be sewn…I know, I know…it will eventually happen!  However, I have made a pair of culottes using some rayon twill seen above.  These are such a great summer make.

Holly Jumpsuit by Love You Sew

I know what you’re thinking….The big question with all rompers and jumpsuits is always, “How do you pee?”  There is a nice long invisible zipper which extends from the side dart down to the hip.  This allows you to slip the romper on and off in combination with unbuttoning the placket.  I wish I had a blue zipper to match my Holly when I was making this in time for a party, but I went with the only invisible zipper I had on-hand — black.  With the smart placement of the zipper, you can only see the pull when I have my arm up…and it’s still very discreet.

Holly Jumpsuit by Love You Sew

Fabric

When I was looking for fabric, I wanted something light enough to wear during warm weather, but structured enough to hold it’s shape and not wrinkle easily. Since this was my first romper, I also was looking for a simple print that could help camouflage any imperfections.

Holly Jumpsuit by Love You Sew

I was happy to find this great Vintage Chambray Stripes at Imagine Gnats. It’s a classic micro stripe with that railroad-esque feel.  I love the blue and how neutral it is for any occasion.  I can just switch up accessories to give it a different feel.  At 4.5 oz this is still light enough with a soft hand and the 100% cotton content makes it breathable for the summer.

Pattern

Holly Jumpsuit by Love You Sew

For the romper, I used view A and made a size UK10/US12 for both the bodice and bottoms based on my measurements. Since I already made the culottes, I knew I wouldn’t need any adjustments on the bottoms, but I did forget to take into account that I shortened the rise on them previously.  So, my romper ended up being too short! *Cue head-slap* Fortunately, I had enough fabric (thanks to the extra wide WOF) left to remake the bottoms.  Since there is no fly, it wasn’t too much of a set-back.  I’ll turn the first set with the lower rise into shorts by adding on the waistband found in View C.  Phew!

Holly Jumpsuit by Love You Sew

These are the additional modifications I made to the Holly:

  • Added lightweight woven interfacing in the placket to hold the snaps, but I would add it even if I used buttons for more stability
  • Used metal snaps instead of buttons for faster bathroom breaks 😉
  • Added slash pockets by drafting a pocket and the facing  (the one thing missing with the pattern)
  • Decreased the seam allowance for the sleeve and increased the armscye to match
  • Reduced seam allowance to 3/8″ between the bodice and shorts for more crotch room

Holly Jumpsuit by Love You Sew

When I make this again, I would consider the following modifications:

  • Slight broadback adjustment – There is a little bit of tightness across my shoulder blades.
  • Bicep adjustment for even more ease – After wearing this to an event (with lots of sweating!) I think adding in more arm ease would allow more air flow and an easier time getting the romper off and on.
  • Increase the bodice length by 1/2″ – I’m only 5’3″ but if I raise my arms all the way up, I get some cameltoe, which is surprising. Most patterns are drafted for 5’5″-5’8″ that I’ve seen, and usually I have to shorten the bodice on a pattern.
  • Lower the side darts by ~1/2″ – Everything looked good when I was finished, but after an additional washing, the darts look a little too high.

Holly Jumpsuit by Love You Sew

Final Thoughts:

For my first romper, I am SO pleased with this make. I love the slim fit around the waist and the ample ease around the buttocks and thighs.  This is a great pattern for my fellow pear shapes! But it is certainly still great for other body shapes as well with just simple changes to the darts. This fabric was great for the pattern but I may use a woven with just a little stretch next time and probably won’t need those broadback and bicep adjustments.

Holly Jumpsuit by Love You Sew

Project Summary:

Now that I’m done with my very first romper, I think I’m ready for another.  Do you have any good romper/jumpsuit patterns to recommend?  Let me know in the comments.  I would love to hear your thoughts!

 

Happy Sewing,

Cristy

 

This post may contain affiliate links for which I may receive compensation.  This helps keep ads off the blog and helps me to keep this website afloat.  Thank you for your support.

Raspberry Dress by Love You Sew

Raspberry Dress Tester Review

4 Comments

Raspberry Dress by Love You Sew
Last month (when I had time and the kids were still in school) I had the opportunity to make one of CocoWawa’s patterns, the Raspberry Dress!  I had never made one of Ana’s patterns and just discovered her IG feed and designs earlier this year.  So, I was very excited when she asked me to try one out…especially to learn this (new to me) shirring technique!

The Raspberry Dress also comes in Jumpsuit and Playsuit views all sharing the same shirred bodice.  There are also three different strap options along with pockets (!!!) to mix and match with the bottoms.  One of the nicest options is that the pattern is available in BOTH English and Spanish!  More of our global sewing community can enjoy this make!!!  You can check out all the different versions and other tester inspiration here on the CocoWawa blog.

Fabric:

I purchased this Robert Kaufman Chambray double-gauze (affiliate link) years ago (maybe four or five?) for a specific dress, but after hearing so many bad reviews from my friends, I decided to never make it.  So, this fabric has sat on my shelves until I could find the right project to use up all three yards of it…and here it is!

Double-gauze is exactly what its name tells you.  This fabric is made of two separate layers of cotton gauze, known for it’s open weave making it very light and airy.  Double gauze is created when the two layers are joined with little stitches at regular intervals throughout the fabric.  Usually, the conjoining stitches are undetectable from the right side, but in my case,  the stitches created the gorgeous dobby texture.  Double gauze is more opaque with the added layer, yet still has the breathability — perfect for hot weather.  That’s why this fabric was THE perfect choice for the summery Raspberry silhouette.

Shirring:

The main feature of this pattern is the shirred bodice.  Essentially, you are sewing in elastic thread to gather woven (non-stretch) fabric to then make it stretchy.  The bodice starts out at twice the width you see and you sew row after row, while gathering the fabric to get it smaller.  I’m so happy Ana provided the actual machine settings for the shirring.  I used a small 70 needle for the delicate double gauze and hand-wound my elastic bobbin thread as instructed.  With the lightweight fabric, the shirring worked on my first try (true shocker!)  I would imagine that heavier fabric would not pull back as much as this double-gauze.

With elastic thread, you can’t back-stitch, which gets a bit tricky. I left long thread tails at the start of each row to tie off, but ended up cutting them off when I overlocked the side seams. To make sure the elastic thread wouldn’t detach with wear, I sewed the side seams twice and shortened my stitch length to about 1.8-2.0mm on the second pass.

Shirring takes time…my tip would be to be patient and take breaks between every two or three rows because my hands had to fully stretch out the fabric to make sure it ran through the machine straight and evenly.  They would cramp up otherwise, holding all of the fabric taut and steady.

Dress Version:

Out of all of the different views of the Raspberry, I knew I would wear the dress the most (I’m still warming up to the jumpsuit game!)  I’ve been looking for more midi to maxi length dresses for this summer and the length worked for my 5’3″ frame.  I chose the simple thin straps to tie off in bows.  With the added ruffle, a simple strap would balance it all out.

Modifications:

  • Sewed a narrow hem at the neckline since I did not want a wide ruffle at the top. I compensated for this and added an extra row of shirring to keep the neckline closer to my body
  • Shortened the bodice by two inches to keep the shirring above my belly button.  (I’m just particular and prefer to not have the fabric rub on my pooch. Lol.)
  • Omitted the skirt elastic entirely since it wasn’t laying flat with my light fabric.  And since I WAS working with light fabric, the shirring could hold the weight of the skirt and not be dragged down.
  • Shortened the skirt by 6″ —  2″ came from the top (since I screwed up while overlocking and accidentally cut into my fabric…whomp…whomp…  Fortunately, I’m petite and didn’t throw off the placement of the in-seam pocket. Phew!) The remaining 4″ came off the bottom.
  • Added a ruffle all around the skirt using the remaining fabric I had – (2) 56″ x 6″ lengths of fabric gathered and sewn to the bottom with a 1/2″ closed hem.

Project Details:

I hope you enjoyed this make and can use some of the tips as I worked through the tester version of the Raspberry Dress!  Please let me know if this helped you in the comments below!

 

Happy Summer Sewing!

Cristy

 

As a tester, the pattern was provided to me for feedback.  This blog post was not required as part of the testing process.  All thoughts and opinions are my own (as always.) 

Abbey Convertible Backpack DIY Sewing Pattern

17 Comments

I’ve been on a long pattern writing break and look at me….I have two out in less than a month!  It might be all the inspiration I’m feeling or maybe it’s the fact that I’ve learned quite a bit more about designing now 🙂  It really is a combination of all the above along with clearing my plate of other sewing commitments so I can focus!  You can check out the FREE Kelly Waist Bag pattern  just released a few weeks ago here and keep on reading for the long awaited Abbey Convertible Backpack…

Abbey Backpack by Love You Sew

At the end of 2017,  I was looking for a fun bag idea for my toddler niece.  But since she’s a little fashionista, I wanted to make her a “non-kid bag” and more of an “adult-bag”….just in a miniature size. With boho style hot at that minute, I remember seeing so many hiker style backpacks around with southwestern prints.  I had this great canvas fabric in my stash from April Rhodes and knew it would be perfect for my niece.

I made this little backpack just thinking it would be a one-off project — that was until I posted it on my Instagram.  That’s when all the comments and inquiries flooded in.  I had at least half a dozen people wanting to buy it.  But no, it was only for my niece. <3  Although I didn’t want to sell the actual bag, I knew I had a great design…especially as a kid-size bag that’s modern and something an adult might like….

Fast forward a year after learning to use some proper drafting software and I was set to tackle the longest and most involved bag I’ve written to date.  From the first design, much has changed.  The body is slightly larger and more pockets have been added inside and on the back. The most significant change is the additional hardware to make the Abbey a completely convertible adult bag too!

Abbey Crossbody by Love You Sew

With a quick switch of the swivel clasps from the lower connectors up to the top ones, the backpack changes to a cross-body!  This allows the Abbey to be such a versatile bag and can change with you depending on the situation.  ‘Sometimes you just want your bag out of the way and sometimes you need all the access to it — I get it!  Additionally, the Abbey also has these features:

  • Convenient front zipper pocket for keys, chapstick or change
  • Magnetic snap tab closure for easy access to the main compartment
  • Back slip pocket – perfect for your phone, boarding passes or concert tickets
  • Interior zipper pocket to keep valuables safe
  • A generously sized adjustable strap which can be used for the backpack or crossbody

As a bag-maker, you will love having this unique design which you can (of course) keep, but also gift to friends and family, both young and mature.  I’m thinking some mommy and me versions would be so cute!  You will also learn some great techniques such as:

  • Installing magnetic snaps (with my tips to prevent the prongs from wearing through your fabric!)
  • Using three different types of interfacing for a structured, yet pliable bag
  • Creating zipper welt pockets
  • Making an adjustable strap
  • Construction style which leaves a clean and seamless base.
  • And I’m already working on some hacks to leave you with more options and ways to customize each bag you make 😉

Sonata Abbey Backpack

For some inspiration, you can check out my Sonata Fabric Showcase Tour here.  These were both prototypes as I was testing out interfacing combinations and still checking out which features to keep in the pattern.

  • The blue bag used foam interfacing which I thought was just too much.  The bag was not able to fold very well.  However, it uses leather accents which I do include in the cutting table.  (I will write a blog post for the zipper frame soon!)
  • For the pink bag, this was a test to see how quilt cotton would hold versus the recommended canvas.  It still had great shape and pliability, but some structure is lost.  Once the bag is filled up, it’s not that noticeable though.  This version is the lightest weight and great for using all of those cute quilt cotton prints for little ones.

If you need even more inspiration, you have to check out all of these amazing creations from my tester group.  These ladies are absolutely amazing and I could not make this pattern without all of their help!  You can click through each image below to direct you to the maker.

Pattern Summary:

I hope you enjoy this pattern as much I do!  Happy Sewing!

 

Cristy

 

 

Kelly Waist Bag and Clutch

Introducing the FREE Kelly Waist Bag Pattern

9 Comments

It’s such an incredible feeling when inspiration hits at the right time and the creative juices are just flowing.  That’s what happened when I paired this beautiful leather from Measure Fabric with  my idea for a simple and sleek waist bag.  I was able to quickly design, prototype, tweak and write a full pattern within 48 hrs (muuuuch different from my usual practice of taking months to write a pattern!)

 

Whatever you call them – waist bag, fanny pack, belt bag, hip bag….wearing a bag around your torso is the hottest bag trend right now.  Although the classic 80’s throwback style is probably the most popular, I wanted to have something with cleaner lines to match my fashion tastes.   I also wanted to make sure if I’m making a bag (especially in leather,) it can last beyond the current trend.  So I designed a minimalist raw edge leather bag which can convert to a clutch, simply by removing the belt.

Leather

Initially, I thought I would make an envelope style clutch when I first saw this leather on Measure Fabric’s website.  I thought the leather might be a little too difficult to sew on my machine.  I figured I could use a bunch of rivets to origami it altogether since I already fell in love with the top-grain texture and beautiful neutral navy color.

Thanks to the miracle of videos on Instagram, the shop ladies were able to show me the leather’s softer hand.  The hide is approximately 2mm thick, but is still pliable enough to shape and can hold some weight.  You can check out their entire selection here. Get ready to drool over all the beautiful hides!

Bag Features

Named after one of my awesome nieces, this waist bag is all about having some freedom.  Whether you want hands-free options to wrangle the kids like me, or to attend the latest festival concert like Kelly (oh to be in my twenties again,) this is your bag!  It’s small but mighty with plenty of great features:

  • Slip pocket – Perfect to stowe away cash, ID and/or a Shuffle Cardholder
  • Simple screw on button stud – There is no need for fancy hardware or tools.  But feel free to make this your own!  You can find them on Amazon here or here and on Etsy here. (aff links)
  • Adjustable belt design – Whether you wear this with just a tee or over a bulky sweater, the belt can change with you.
  • Convertible to clutch – Simply remove the belt and you have a perfect leather clutch for a night out or use it as a pouch in a larger tote.
  • Able to use any belt – The belt guide is generously sized to accommodate most belt widths.  You can use your own belts to mix and match, creating different looks.
  • Fits many arena and public venue bag guidelines – With finished dimensions of 8″ x 5″ x 1″, the Kelly conforms to many stadium and concert bag regulations.  It’s the right size for your phone, ID, cash, with room to spare for keys.

Sewing Tips:

  • Leather and some vinyl are not self-healing.  Needle holes will be permanent, so work slowly and use clips instead of pins.
  • Use a leather needle with leather or a heavy duty (16 or 18) needle with cork or vinyl to handle the extra thickness.  Machines vary, so don’t forget to TEST before making the bag!
  • With thicker substrates, leave long thread tails to manually tie off with double and even triple knots.  Don’t try to back-stitch because your machine may not like the bulk.
  • A walking foot is great to get even stitches without sticking and a Teflon foot prevents sticking as well
  • Use a stiletto tool like this or carefully notch into the gusset 1/8″ to help maneuver around the curves. (aff link)
  • For punching the holes, I love this tool with a softer plastic bed vs a metal bed.  You get a cleaner cut through the leather. (aff link)

|| Click Here for the Kelly Waist Bag + Clutch Pattern by Love You Sew ||

#kellywaistbag #loveyousewpatterns 

Print at 100% or Actual size

Please share your projects on social media with the #kellywaistbag and #loveyousewpatterns tags.  I would LOVE to see what you do with the pattern.  Don’t forget to give me a follow and tag me @loveyousew_ so I don’t miss it!

Enjoy!!!

 

Leather for this project was provided by Measure Fabric.  All thoughts and opinions are always my own.  There are also affiliate links in the post for which I would receive a small commission only if you decide to make a purchase.